Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.
Do Not Perform Maintenance Unless:
You are trained and qualified to perform maintenance on this machine.
You read, understand and obey:
manufacturer’s instructions and safety rules
employer’s safety rules and worksite regulations applicable governmental regulations
You have the appropriate tools, lifting equipment and a suitable workshop.
Ground Module Configuration
When it becomes necessary to replace a ground or power module on a JLG machine, it must be properly configured after installation. Use your JLG® Analyzer, or the new JLG® Mobile Analyzer, for configuration by accessing the “Machine Setup” menu and choosing the correct model and options appropriate to your machine.
If possible, before you replace the module, record all of the settings. This will allow you to set everything back to the correct settings. You may also consult your machine’s service manual to get the default factory settings.
Take a look at this video for a brief overview of the JLG Analyzer’s Machine Setup functions.
Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.
Do Not Perform Maintenance Unless:
You are trained and qualified to perform maintenance on this machine.
You read, understand and obey:
manufacturer’s instructions and safety rules
employer’s safety rules and worksite regulations applicable governmental regulations
You have the appropriate tools, lifting equipment and a suitable workshop.
Ground vs. Platform Personality Adjustment with Handheld Analyzer
When adjusting personalities on any JLG model equipped with the ADE system, there are separate personalities for platform and ground controls. A common misconception is that if you are plugged into the ground, then you are adjusting the ground personalities by default. This is not the case. In the analyzer, under the heading “Personalities,” you will find a subheading for “Ground Controls.” Under “Ground Controls,” you will find selections for all of the functions that can be operated from the ground. Anytime a personality setting is adjusted, ensuring that function speeds are still within acceptable ranges called out in the service and maintenance manuals is essential.
Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.
Do Not Perform Maintenance Unless:
You are trained and qualified to perform maintenance on this machine.
You read, understand and obey:
manufacturer’s instructions and safety rules
employer’s safety rules and worksite regulations applicable governmental regulations
You have the appropriate tools, lifting equipment and a suitable workshop.
Handheld Analyzers
JLG has made two different shaped analyzers over the years—square and T-shaped. Our handheld
analyzers 2901443 are used for diagnostic programming and troubleshooting on aerial work platforms. Both will perform the same functions and work on all machines that accept an analyzer. These should not be confused with the “calibrator” that is used on Sevcon motor controllers, as that is totally different and not compatible.
Danger
